RaceCal’s R35 GTR secondary injection loom when moving to a 12 injector setup.
This will work with a variety of ECU’s such as Syvecs & Motec. As standard we terminate with Superseal 1.0 pins that fit both the above ECU’s, however if you require a different pin on the ECU side please let us know.
The harness is constructed with Tefzel M22759/32 wire, concentrically twisted and then covered in Raychem DR-25 for durability and finally labelled for that professional look.
You will see in the pictures you have a DTM connector break off, this allows the ECU section of the wiring to be passed through the bulkhead. The extension loom (not pictured) is produced using the same materials and techniques as the main injector loom.
The loom can be produced to fit ID1050/1300/1700 fit (USCAR Connector) ID2000 (Denso Connector) or ASNU (Bosch JPT Style Pictured). Please select from the options when ordering.